DIN 2391 BRIGHT ROWER PRÉCISION TUBE SEAVER SAVEL SEAVER
Obtenir le dernier prixType de paiement: | L/C,D/P,T/T |
Incoterm: | CFR,EXW,CIF,FOB |
transport: | Ocean,Land,Express |
Hafen: | Tianjin,Shanghai,Qingdao |
Type de paiement: | L/C,D/P,T/T |
Incoterm: | CFR,EXW,CIF,FOB |
transport: | Ocean,Land,Express |
Hafen: | Tianjin,Shanghai,Qingdao |
Modèle: DIN2391 St35 St45 St52
La Norme: VACARME
Matériel: ST35-ST52
Forme De La Section: Rond
Lieu D'origine: Chine
Application: Tuyau de fluide, Tuyau de chaudière, Tuyau de structure, Tuyau hydraulique
Processus De Production: Étiré à froid
Certification: ce
Que Ce Soit En Alliage: Est un alliage
Tolérance: ± 1%
Catégorie: Tuyau en acier sans soudure
Service De Traitement: Coupe, Perforation, Décollage, Soudage, Pliant
Unités de vente | : | Ton |
Type de colis | : | Emballage marin standard, ou comme l'exige le client |
Exemple d’image | : |
Tubes en acier de précision DIN2391
DIN 2391 Standard Spécifie les tubes en acier transparent utilisés pour la mécanique et l'automobile.
Les principaux produits de la qualité en acier / acier: Din2391-1 (ST35, ST45, ST52).
DIN2391 La partie 2 spécifie les dimensions pour les tubes en acier de précision à froid finis et sans couture et doit être utilisé en conjonction avec Din2391 Part2 qui indique les conditions de livraison technique pertinentes. Les tailles préférées énumérées en standard sont principalement utilisées en génie mécanique et automobile.
Lorsque des tubes en acier des dimensions spécifiés dans cette norme sont de se conformer aux conditions de livraison techniques énumérées dans le paragraphe 1.2 de DIN 2391 partie 2.
DIN 2391 Applications de tubes de précision sans couture - utilisés dans le cylindre hydraulique et pneumatique, l'ingénierie mécanique et automobile.
Standard | Grade | Chemical Components (%) | |||||
Symbol | Material No. | C | Si | Mn | P | S | |
DIN2391 | St 30 Si | 1.0211 | ≤0.10 | ≤0.10 | ≤0.55 | ≤0.025 | ≤0.025 |
St 30 Al | 1.0212 | ≤0.10 | ≤0.05 | ≤0.55 | ≤0.025 | ≤0.025 | |
St 35 | 1.0308 | ≤0.17 | ≤0.35 | ≥0.40 | ≤0.025 | ≤0.025 | |
St 45 | 1.0408 | ≤0.21 | ≤0.35 | ≥0.40 | ≤0.025 | ≤0.025 | |
St 52 | 1.058 | ≤0.22 | ≤0.55 | ≤1.60 | ≤0.025 | ≤0.025 |
Les tubes doivent être fabriqués à partir de processus tirés à froid ou à froid. Les tubes doivent être fournis dans l'une des conditions de livraison comme suit:
Designation | Symbol | Description |
Cold finished (hard) | BK | Tubes do not undergo heat treatment following the final cold forming and thus, have a rather high resistance to deformation. |
Cold finished (soft) | BKW | The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding). |
Cold finished and stress-relieved | BKS | Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree. |
Annealed | GBK | The last cold forming process is followed by annealing in a controlled atmosphere. |
Normalized | NBK | The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere. |
Symbole de condition de livraison conformément à EN10305 et DIN2391.
Symbol in accordance with EN 10305 | Symbol in accordance with DIN2391 |
+C | BK |
+LC | BKW |
+SR | BKS |
+A | GBK |
+N | NBK |
Steel Grade | Minimum values for the delivery condition | ||||||||||||
Steel Name | Steel Number | BK | BKW | BKS | GBK | NBK | |||||||
Rm | A % | Rm | A % | Rm | ReH | A % | Rm | A % | Rm | ReH | A % | ||
Mpa | Mpa | Mpa | Mpa | Mpa | Mpa | Mpa | |||||||
St 30 Si | 1.0211 | 430 | 8 | 380 | 12 | 380 | 280 | 16 | 280 | 30 | 290 to 420 | 215 | 30 |
St 30 Al | 1.0212 | 430 | 8 | 380 | 12 | 380 | 280 | 16 | 280 | 30 | 290 to 420 | 215 | 30 |
St 35 | 1.0308 | 480 | 6 | 420 | 10 | 420 | 315 | 14 | 315 | 25 | 340 to 470 | 235 | 25 |
St 45 | 1.0408 | 580 | 5 | 520 | 8 | 520 | 375 | 12 | 390 | 21 | 440 to 570 | 255 | 21 |
St 52 | 1.0580 | 640 | 4 | 580 | 7 | 580 | 420 | 10 | 490 | 22 | 490 to 630 | 355 | 22 |
Inspection or test types | Test frequency | |
Internal test | Acceptance test | |
Chemical analysis | M | M |
Tensile testing | M | One per tested batch |
Flattening test or extension test | M | Two per tested batch |
Dimension verification | M | M |
Visual inspection | M | M |
NDT in order to identify leaks | Individual | Individual |
Marquage
Le marquage suivant doit être illustré sur une étiquette attachée au bundle:
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.